Advertisement
1. Install from CD: You can click the Adobe Bridge icon from the Autoplay menu or browse to
the Adobe Bridge CS3 folder on the CD.
2. If you downloaded your copy of Audition 3.0, you can run the Bridge installer from the
Adobe Bridge CS3 folder.
The stand-alone installer for Adobe Bridge CS3 cannot be installed from a network location. You
will receive an error message asking you to insert Adobe Bridge CS3 when a network install is
attempted and the process will fail. If you have the Adobe Bridge CS3 folder stored in a network
location, please copy the folder to a local hard drive in order to properly install the application.
Notes:
•
If you already have Adobe Bridge CS3 installed there is no need to install it again. Audition
3.0 will be able to use the version that was previously installed.
•
After installing Bridge CS3 we suggest that you launch Bridge and go to Help > Updates to
download and install the latest version.
ASIO driver vs. Audition Windows Sound
For the highest level of compatibility, Adobe Audition 3.0 automatically assigns your default
Windows sound card as its default inputs and outputs. If your audio hardware supports the ASIO
driver model, we recommend that you choose it in the Audio Hardware setup dialog instead of the
Audition Windows Sound, as this will give improved performance in most cases.
There is a known issue with the ASIO driver for the Creative Audigy line of sound cards where,
when Audition closes, the ASIO driver does not release itself and Audition remains running in
memory and visible as a running process in the Windows Task Manager. To prevent this issue with
these cards, leave the hardware setup set to Audition Windows Sound.
CD burning
Some CD-RW drives cannot handle writing ISRC and UPC/EAN values. If your attempt to write
fails, try to uncheck the Write CD-Text box in the Write CD dialog and uncheck the ISRC box in the
Track Properties dialog for every track in the CD Project View.
For some CD-RW drives, an incorrect write speed is displayed in the CD Device Properties dialog
and you will be unable to change the setting. In these cases, the CD will be burned at the
maximum possible speed for the drive.
The maximum number of Index Cues per track supported by Adobe Audition is 98.
Extract Audio from CD
The default mode for CD audio extraction is SPTI. It is recommended that you do not use ASPI
due to known problems with different versions of ASPI drivers. For more details, visit the
Audition
Support site.
Only silence will be extracted when the Buffer Size setting in the Extract Audio from CD dialog is
greater than 128 KB when using SPTI mode for CD audio extraction. Use 128 KB or lower to work
around this problem.
ReWire
Adobe
Advertisement
