Emerson Research iP500 Owner's Manual page 27

Connecting and Playing Your 'Dockable' iPod
(Refer To Separate Instructions For The iPod
IMPORTANT: To avoid any unwanted distortion when listening to your iPod
through the speakers of this system we recommend that you shut off the
equalizer in the iPod
To shut off the iPod
the "Settings" menu, select the "EQ" setting and turn the EQ ' Off' .
1.) The Hold switch on your iPod
click-wheel navigation controls.
2.) Remove the docking cradle from the front panel by sliding the cradle upward
as shown. If you have not already done so turn the cradle over and press on
the bottom of the connector cover to remove it from the cradle. Discard the
paper "dummy iPod
3. Choose the appropriate adapter for your particular iPod
the 6 adapters supplied with this system and insert the adapter into the docking
cradle as shown. (Refer to the iPod adapter chart).
Then re-install the docking cradle in the front panel.
iP500_042307.p65
®
before inserting it in the docking station of this system.
®
equalizer, go to the "Main Menu" in your iPod
®
should be set to the ' Off' position to unlock the
®
".
26
26
®
®
Shuffle)
®
, scroll to
®
model from among
23/4/2007, 17:00
®