Antenna Information - Emerson Research iP500 Owner's Manual

4.) Adjust the Volume + / – controls as desired.
5.) When you are finished listening press the
' Off' . The display lighting and the Power LED indicator go off.
The display changes from radio frequency to the
correct time, month and date display.
NOTE: The system remembers the last station you were listening to, plus
the Volume settings you selected before switching the power off, and
automatically returns to those same settings when the radio is switched on
again.

Antenna Information

AM
The AM bar antenna is inside the cabinet. It may be necessary to adjust the position
of the cabinet until the internal antenna is receiving the strongest possible signal.
FM
Make sure that the FM wire antenna is firmly attached to the screw terminal on the
back cabinet. It may be necessary to adjust the position of the FM wire antenna to
find the position that provides the best FM reception.
iP500_042307.p65
Power button to shut the system
21
21 23/4/2007, 17:00