Emerson Research iP500 Owner's Manual page 31

Connecting and Playing A 1G (First Generation) iPod
The docking station of this system includes an Apple USB connector specifically
designed for the 1G (First Generation) iPod
Note: If you have a new 2G (Second Generation) iPod
connect it to the Auxiliary Input jack of this system. Please refer to the
connection instructions on page 33.
IMPORTANT!
• Do not attempt to connect other portable MP3 players or portable USB
drives to this iPod
to the Auxiliary Input (AUX IN) jack of this system but not to the USB
connector. This system is not compatible with portable USB storage drives
that contain compressed MP3 or WMA audio files.
®
• The iPod Shuffle has no interface to receive commands from an external
controller, therefore you cannot use the iPod
the Tuning + (
REV. buttons on the remote control of this system to operate the iPod
Shuffle. You can only use the controls on the iPod
1.) Set the function switch on your iPod
playback position and remove the protective cap.
2.) Connect your iPod
only be connected one way, with the front panel of the Shuffle facing outward.
Original iPod
(First Generation)
Press the Power button on this system to turn the power ' On' .
iP500_042307.p65
®
Shuffle USB connector. You can connect MP3 players
) / – ( ) buttons on the top panel, or the iPod FWD. / iPod
®
Shuffle to either the Normal or Shuffle
® Shuffle to the USB connector on the docking station. It can
®
Shuffle
30
30
®
Shuffle with direct USB connector.
®
Shuffle you may
PLAY/PAUSE button,
®
Shuffle itself.
23/4/2007, 17:01
® Shuffle
®