Recalling Preset Stations; Changing Preset Stations - Emerson Research iP500 Owner's Manual

Recalling Preset Stations

Press the Function button to select the desired band, then press the CH + or CH –
buttons to scroll through the preset memory stations.

Changing Preset Stations

1.) Tune to the new station that you wish to memorize.
2.) Press the Memory button, then press the CH + or CH – buttons to select the
preset memory channel number that you wish to change.
3.) While the indicators are flashing, press the Memory button again. The new
station is entered into the selected memory channel number and the previously
memorized station is deleted.
iP500_042307.p65
23
23 23/4/2007, 17:00