Table of Contents
Advertisement
Adjusting The Digital Tuner For Use in Other Countries
The tuner in this system can be adjusted for the AM and FM bands and frequency
steps used in Europe and Japan in addition to the normal USA settings. The tuner
was set for the USA settings at our factory. If this system will be used in the USA
there is no need for you to make any adjustments. This information is provided
only in the event that this system will be used in another country with different
requirements. The AM and FM frequency coverage and the tuner frequency steps
available in this system are as follows:
USA
AM
(520–1710)kHz
10kHz Steps
FM
(87.5–108)MHz
0.1MHz Steps
To change from the USA broadcast system to another broadcast system proceed
as follows:
1.) If necessary, press the
2.) Press the Mode button 7 times.
The "USA" indicators flash in the display.
3.) While the display is flashing press either the Tuning + (
the top panel or TUN
switch among the "USA", "EU" (Europe), "JP" (Japan) settings.
4.) Press the Mode button to save the setting and exit the setting mode.
iP500_042307.p65
EUROPE (EU)
(522–1620)kHz
9kHz Steps
(87.5–108)MHz
0.05MHz Steps
Power button to shut the power ' Off' .
/
buttons on the remote control to alternately
24
24
JAPAN (JP)
(522–1629)kHz
9kHz Steps
(76.0–108)MHz
0.1MHz Steps
) / – (
) buttons on
23/4/2007, 17:00
Advertisement
Table of Contents
