Configuring Ptz Settings - Lorex VANTAGE LH110 ECO SERIES Instruction Manual

Remote Viewing

Configuring PTZ settings

The system supports PTZ (Pan, Tilt, Zoom cameras. PTZ cameras are sold separately.
• For details on connecting PTZ cameras to your system, see "Appendix H: Connecting a PTZ
Camera" on page 112.
To control the PTZ settings on the DVR:
1 Select the channel the PTZ camera is connected to.
2 Use the PTZ control panel to control the pan, tilt, zoom, focus and iris control of the camera.
Direction keys:
Click to pan and
tilt the camera
Click the + and -
symbols to
adjust the
camera Zoom,
Focus and Iris
settings
Camera Pre-set controls
To assign a camera pre-set:
1 Adjust the camera to the desired pre-set location using the direction keys.
2 In the Pan&Tilt Pos drop-down menu, enter a pre-set number.
3 Click the Set (
4 Click Save ( ) to save your settings.
To open a pre-set, enter the desired Pan&Tilt Pos number. Click the Go To button (
64
Cruise
) button.
Speed Slider:
Increase or decrease
the pan and tilt speed
Load button
Clear settings
).