Lorex VANTAGE LH110 ECO SERIES Instruction Manual page 25

Connecting BNC Cameras
To install BNC cameras to your system:
1 Connect the male power connector on the BNC extension cable to the female power
connector on the camera.
• Connect the BNC connector to the camera.
2 Connect the female power connector on the BNC extension cable to the power adapter.
• Connect the BNC connector to the BNC port on the system.
3 Plug the power adapter to a power outlet.
Male power connector
Connecting and Removing BNC cables
BNC (Bayonet Nut Connector) is a special connector that locks on to the system port, and
cannot be accidently removed.
To connect or remove a BNC connector:
• Push the BNC connector firmly into the BNC port and simultaneously twist the connector
clockwise to tighten.
• To remove a BNC connector from a BNC port, push and simultaneously twist the connector
counter-clockwise to loosen the BNC connector.
Digital Video Recorder
BNC Extension cable
Connecting Cameras
Female power connector
11