Starting The System; Password - Lorex VANTAGE LH110 ECO SERIES Instruction Manual

Starting the System

To power the system ON:
• 4/8 Channel: Connect the power cable to the DC 12V port on the rear panel.
• 16- Channel : Press I on the power switch on the rear panel of the system.
At startup, the system performs a basic system check and runs an initial loading sequence.
After a few moments, the system loads a live display view.
Initial startup screen
To power the system OFF:
• 4/8 Channel: Unplug the power cord from the rear panel of the system. Unplug the power cord.
• 16 Channel: Press O on the power switch on the rear panel of the system. Unplug the power
cord.

Password

: By default, passwords are disabled on the system. You do not need to
ATTENTION
enter a password when accessing any system menus. For security purposes, it is
highly recommended to enable passwords on the system using the Password Menu.
For details, see "Managing Passwords" on page 29.
Password menu
16-Channel model
Starting the System
15