4
Select the checkboxes to enable the menus the user will have access to.
5
Click Save to apply your settings.
To change the Admin Password:
1
Click REMOTE Config>System>User.
2
Select admin in the user list.
3
In the Pws Enable drop-down menu, select Enable.
4
In the Password and Confirm fields, enter the new password.
5
Click Save apply the settings.
DST Menu
To configure the DST (daylight saving time) menu:
1
Click REMOTE Config>System>DST.
2
Configure the following:
• DST: Select Enable or Disable to enable or disable DST on the system.
• Time Offset: Enter the number of hours DST should offset.
• DST Mode: Select the desired DST mode.
• Start Time: Select when DST begins.
• End Time: Select when DST ends.
3
Click Save to apply your changes.
Configuring the system remotely
Select the menus that the users will
have access to
145