Replacing The Hard Drive; Formatting The Hard Drive - Lorex VANTAGE LH110 ECO SERIES Instruction Manual

Replacing the Hard Drive

To replace the hard drive:
1 Place the new drive in the housing. Note that the hard drive must be installed upside down on
the 4/8 channel models only.
2 Reconnect the power and data cables. Each cable can only be connected one way.
3 Replace the cover, tucking the lip of the cover at the front panel.
4 Replace the screws on the side and rear panels of the cover.

Formatting the Hard Drive

If you replace the pre-installed hard drive, it
properly with the system.
: Formatting the HDD erases all data on the hard disk.
ATTENTION
To format the hard disk:
1 Right-click in the main viewing window, and then click Main Menu>Device > HDD.
2 Click the checkbox under Select to choose the drive you wish to reformat.
3 Click Format HDD.
4 When the warning window appears, click OK. Wait for the system to format the hard drive.
NOTE: You will notice that the size of the HDD and the free space are not the same. The system uses a
portion of the disk space for the operating system and initialization. This is common in all security DVRs
as well as common PC hard drives.
This step cannot be undone.
Appendix L: Replacing the Hard Drive
must
be formatted in order to function
Select checkbox
119