8- channel
1
IR Sensor: IR receiver for the remote control.
LED Indicators:
• PWR : Power LED
• HDD : Hard disk activity LED
2
Menu & Playback Controls:
•
: In Playback mode, press for reverse playback. Press repeatedly to speed up video.
•
: In Playback mode, press to Play video. Press again to pause video playback
•
: In Playback mode, press to fast forward video. Press repeatedly to speed up video.
•
: In Playback mode, press to stop video playback.
• In main viewing mode, press to stop DVR recording.
•
:Press to start/ resume recording. When the channel displays a red box with the letter "C",
the channel is recording.
• Menu / Esc: Opens the system menu / or press to exit a menu selection
3
Channel Controls for full screen view:
• Ch1/5: Press once to display channel 1. Press
• CH 2/6: Press once to display channel 2. Press
• CH3/7:Press once to display channel 3. Press
• CH4/8: Press once to display channel 4. Press
•
Press to view video in channels in Quad view (channels 1-4 , 5-8), or split screen mode
(channels 1-8), To switch viewing modes, press the button repeatedly.
4
Navigation Buttons:
•
: Press to move cursor up
•
: Press to move cursor down
•
: Press to move cursor left
•
:Press to move cursor right
5
PTZ/
:
• Within system menus: Press to confirm a selection.
• In the main viewing mode, press to open the System Information window.
• In the main viewing mode, press and hold for 6 seconds to open the PTZ menu.
2
1
3
twice and press 1/5 to view channel 5.
twice and press 2/6 to view channel 6.
twice and press 3/7 to view channel 7.
twice and press 4/8 to view channel 8.
4
5
3