Using The System; Understanding The On-Screen Display - Lorex LW2960 Series User Manual

8

Using the System

By default, the camera(s) included with your system are automatically paired to the re-
ceiver. The camera(s) and receiver will communicate with each other once they are pow-
ered on.
NOTE
It is recommended to power on the cameras before powering on the receiver.

8.1 Understanding the On-screen Display

With camera 1 properly connected and powered on, the system displays a full-screen live
view of the camera.
With more than one camera properly connected and powered on, the system displays up
to 4 channels in split screen with the live view of each camera. The figure below shows the
display configuration for 2 cameras connected.
14
#LX400011; r. 2.0/24200/24203; en-US