Table of Contents
Advertisement
Quick Links
Ultra-Thin LED/LCD TV Mount - 32" to 55"
IMPORTANT: If you don't understand the installation instructions, please consult an
installation specialist
04-0541A
Installation Instructions
Ultra-Thin LED/LCD TV Wall Mount
Material: 2.0mm Cold Rolled Steel Plate
TV Size: 32" - 55"
Max load capacity: 121lbs/55kg
Wall distance: 0.43/11mm
Universal Mounting Pattern
1
Advertisement
Table of Contents
Related Manuals for SIIG Ultra-Thin LED/LCD TV Mount - 32" to 55
Summary of Contents for SIIG Ultra-Thin LED/LCD TV Mount - 32" to 55
-
Page 1: Installation Instructions
Ultra-Thin LED/LCD TV Mount - 32" to 55" Installation Instructions Ultra-Thin LED/LCD TV Wall Mount Material: 2.0mm Cold Rolled Steel Plate TV Size: 32" - 55” Max load capacity: 121lbs/55kg Wall distance: 0.43/11mm Universal Mounting Pattern IMPORTANT: If you don't understand the installation instructions, please consult an installation specialist 04-0541A... -
Page 2: Hardware Kit
INSTALLATION AND OPERATING INSTRUCTIONS Caution Prior to the installation of this product, the installation instructions should be read and completely understood. The installation instructions must be read to prevent personal injury and property damage. Keep these installation instructions in an easily accessible location for future reference. CAUTION: The maximum load capacity is 121 lbs. -
Page 3: Tools Required
Tools Required Phillips head screw driver Stud finder for drywall installation Level 1/2" socket & socket wrench and/or 1/2" open-end wrench Drill, 3/16" (5mm) drill bit for wood stud installation and 3/8" (10mm) masonry drill bit for concrete/brick installation Step 1: Wall Plate Installation a) Wood Stud Installation NOTE: When mounting to wood studs, the two wood studs must be a minimum of 16"... - Page 4 b) Concrete/Brick Installation NOTE: The concrete anchors must be used for concrete installation. With the help of an assistant, and using a bubble level to ensure the wall plate is level, position the wall plate against the wall in the desired mounting location. Mark four holes to be used for securing the mount and place the wall plate aside.
- Page 5 Step 2: Display Bracket Installation To ensure optimal installation, this kit includes various screws of different diameters and lengths. Place your TV screen down on a soft, flat surface, and locate the threaded mounting points that are located on the back of the display. Determine which screw (A/B/C/D/E/F) is of the correct length by carefully inserting a straw, or toothpick, and mark how deep the mounting point is.
-
Page 6: Maintenance
Step 3: Final Installation & Adjustment Hook the TV rails over the top of the wall plate and lower on to wall plate. Pull TV forward from the bottom and connect all TV cables & wires. To secure TV rails, pull strings down to retract locking mechanism & lower bottom of TV to the wall. Let go of strings to engage the locking mechanism. -
Page 7: Technical Support And Warranty
• You are responsible for the cost of shipping. Ship the product to the following address: SIIG, Inc. 6078 Stewart Avenue Fremont, CA 94538-3152, USA RMA #: ________________ • SIIG will ship the repaired or replaced product via Ground in the U.S. and International Economy outside of the U.S. at no cost to the customer. - Page 8 Ultra-Thin LED/LCD TV Mount - 32" to 55" Ultra-Thin LED/LCD TV Mount - 32" to 55" is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Other names used in this publication are for identification only and may be trademarks of their respective companies.