SIIG 04-0680B Installation Instructions Manual

Articulating monitor desk mount - 13" to 27"

Advertisement

Quick Links

Articulating Monitor Desk
Mount - 13" to 27"

Installation Instructions

04-0680B
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 04-0680B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SIIG 04-0680B

  • Page 1: Installation Instructions

    Articulating Monitor Desk Mount - 13" to 27" Installation Instructions 04-0680B...
  • Page 2 Unpacking • Carefully remove contents and lay out on cardboard or other protective surface • Check package contents against the parts list to ensure that all components were received undamaged. Do not use damaged or defective parts • Carefully read all instructions before attempting installation Safety Information •...
  • Page 3: Parts List

    Parts List a - (1x) 35mm Tube Support d - (4x) M4x12 Bolt e - (4x) M4x30 Bolt h - (2x) Wire Clip i - (2x) M10x15 Bolt Tools Required • Phillips screwdriver Installation Caution: This monitor desk mount must be securly attached to the horizontal desktop.
  • Page 4 Install the C Clamp (b) to the 35mm Tube Support (a) according to the thickness of the desktop. The thickness can be changed in three positions. Connect it using 2 M10x15 Bolts (i) and tighten using the Allen Key (j). Tighten the C Clamp to the desktop using the 2 eye bolts.
  • Page 5 Install the Vesa Plate with Arm (c) to the tube support, make sure the wire clips are on the bottom. Tighten the clamp bolt using the Allen Key (j). Caution: When installing the VESA Plate with Arm (c), DO NOT over tighten the clamp bolt.
  • Page 6 Mount the monitor to the Vesa plate. 3-1. For flat back monitors use M4x12 Bolt (d) and M4 Washer (f). Flat Back Monitor...
  • Page 7 3-2. For curved back monitors use M4 Spacer (g), M4x30 Bolt (e) and M4 Washer (f). Curved Back Monitor...
  • Page 8 Adjust the height and install the Wire Clips (h). Adjust Height Install Wire Clips...
  • Page 9 Check the tightness, arrange the cables through the wire clips, and make any final adjustments. Check Tightness Arrange Cables...
  • Page 10 Blank Page...
  • Page 11: Technical Support And Warranty

    (5) years from the date of purchase of the product. SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship.
  • Page 12 Articulating Monitor Desk Mount 13" to 27" Articulating Monitor Desk Mount - 13" to 27" is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective owners.

Table of Contents