Table of Contents
Advertisement
Quick Links
Installation and Operating Instructions
Full-motion/articulating universal LCD/Plasma TV wall-mount
TV size: 23" - 42"
Tilt angle: 0-12 degrees
Max load capacity:100 lbs
Wall distance: 3.75" / 95mm
Bubble level included
Universal Mounting Pattern
IMPORTANT: If you have difficulty following or understanding these installation instructions,
please consult a qualified installation specialist.
04-0621B
Full Motion TV Mount - 23" to 42"
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SIIG Full Motion TV Mount - 23" to 42
Summary of Contents for SIIG Full Motion TV Mount - 23" to 42
- Page 1 Full Motion TV Mount - 23" to 42" Installation and Operating Instructions Full-motion/articulating universal LCD/Plasma TV wall-mount TV size: 23" - 42" Tilt angle: 0-12 degrees Max load capacity:100 lbs Wall distance: 3.75" / 95mm Bubble level included Universal Mounting Pattern IMPORTANT: If you have difficulty following or understanding these installation instructions, please consult a qualified installation specialist.
- Page 2 INSTALLATION AND OPERATING INSTRUCTIONS Caution Prior to the installation of this product, the installation and operating instructions should be read and completely understood. The installation and operating instructions must be read to prevent personal injury and property damage. Keep these installation and operating instructions in an easily accessible location for future reference.
- Page 3 Tools Required: Phillips head screw driver Stud finder for drywall installation 5/16" Socket and Wrench Electric drill, 3/16 drill bit for wood stud installation, and 1/2" (12mm) masonry bit for concrete/brick installation Note: Please ensure that the bubble level (J-2) is properly mounted on the wall plate prior to mounting the wall plate.
- Page 4 b) Concrete / Brick Installation Note: The concrete anchors must be used for concrete and brick installation. Attach the bubble level (J-2) to the wall plate, with the help of an assistant place the wall plate into position against the wall, using the bubble level to keep it level.
- Page 5 Step 3 Final Installation & Adjustment Hang the display plate onto the top of the wall plate and slip onto the wall plate as shown (Figure 7). Tilt the display to the desired angle (Figure 8). Tighten the bottom screw to lock the bracket (Figure 9). Tighten the middle screw to secure the tilt angle (Figure 10).
- Page 6 Blank Page...
- Page 7 Step 1: Submit your RMA request. Go to www.siig.com, click Support, then click RMA to submit a request to SIIG RMA or fax a request to 510-657-5962. If the product is determined to be defective, an RMA number will be issued.
- Page 8 Full Motion TV Mount - 23" to 42" Full Motion TV Mount - 23" to 42" is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective owners.
Need help?
Do you have a question about the Full Motion TV Mount - 23" to 42 and is the answer not in the manual?
Questions and answers