Table of Contents
Advertisement
Quick Links
Universal Tilting TV Mount - 32" to 60"
Tiltable LCD / TFT TV Wall Mount
Material: 2.0mm Cold Rolled Steel Plate
TV Size: 32" - 60"
Tilt: 0 / +15 degrees
Maximum load capacity: 165 lbs / 75 kgs
Wall distance: 3.3" / 84mm
Bubble level included
Universal Mounting Pattern
IMPORTANT: If you don't understand the installation instructions, please
consult an installation specialist
04-0529D
Installation Instructions
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SIIG Universal Tilting TV Mount - 32" to 60
Summary of Contents for SIIG Universal Tilting TV Mount - 32" to 60
-
Page 1: Installation Instructions
Universal Tilting TV Mount - 32" to 60" Installation Instructions Tiltable LCD / TFT TV Wall Mount Material: 2.0mm Cold Rolled Steel Plate TV Size: 32" - 60" Tilt: 0 / +15 degrees Maximum load capacity: 165 lbs / 75 kgs Wall distance: 3.3"... - Page 2 INSTALLATION AND OPERATING INSTRUCTIONS Caution Prior to the installation of this product, the installation instructions should be read and completely understood. The installation instructions must be read to prevent personal injury and property damage. Keep these installation instructions in an easily accessible location for future reference. CAUTION: The maximum load capacity is 165 lbs.
- Page 3 Note: 1. Please ensure that the bubble level (L-2) is properly attached to the wall plate prior to mounting. 2. Please check the two rails before installing, if without the knob, please detach the screw and install the knob. Step 1: Wall plate installation A) Wood Stud Installation NOTE: For secure wood stud mounting, the wall plate must be mounted to two studs at least 16"...
- Page 4 B) Concrete/Brick Installation NOTE: The concrete anchors must be used for concrete installation. Attach the bubble level (L-2) to the wall plate, with the help of an assistant place the wall plate into position against the wall, using the bubble level to keep it level. Mark four holes to be used for securing the mount and place the wall plate aside (figure 1-d).
- Page 5 Blank Page...
- Page 6 Blank Page...
- Page 7 Step 1: Submit your RMA request. Go to www.siig.com, click Support, then click RMA to submit a request to SIIG RMA or fax a request to 510-657-5962. If the product is determined to be defective, an RMA number will be issued.
- Page 8 Universal Tilting TV Mount - 32" to 60" Universal Tilting TV Mount - 32" to 60" is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Other names used in this publication are for identification only and may be trademarks of their respective owners.
Need help?
Do you have a question about the Universal Tilting TV Mount - 32" to 60 and is the answer not in the manual?
Questions and answers