Raven 1x
77
Figure 8-5: AceManager: DNS
Configure *DNSUSER to the same IP address as the IP
Manager (*IPMANAGER1). If your modems have dynamic IP
addresses and not static (the IP address can change when it is
powered up), configure *DNSUPDATE to a low interval to
allow frequent updates.
Configuring the Remote Ravens
for Modbus with UDP
This section covers standard Modbus settings for the Raven at
the remote unit, variations may need additional commands.
1. Configure the ports
In AceManager, select Misc in the side menu.
Figure 8-6: AceManager: Misc
20070914