Attaching Accessories; Mounting The Camera On A Tripod; Attaching The Shoulder Strap - Panasonic HPX300 - Camcorder - 1080p Operating Instructions Manual

Attaching Accessories

Mounting the Camera on a Tripod

Use an optional (SHAN-TM700) tripod adapter to place the
camera on a tripod.
1
 Attachthetripodadaptertothetripod.
Tripodadapter
 NOTE
Use the holes in the tripod adapter that will make
it possible to position the camera over the tripod
adapter's center of gravity.
Also, make sure that the diameter of the selected hole
matches the diameter of the pan head screw.
2
 Attachthecameratothetripodadapter.
• Slide the camera forward along the grooves until
you hear a "click".
Panhead
Removing the Camera from the Tripod
Adapter
While holding the red lever down, move the black lever in
the direction of the arrow, and slide the camera backward
to remove it.
RedLever
 NOTE
If the tripod adapter's pin does not return to its original
position after the camera has been removed, hold the red lever
down and move the black lever in the direction of the arrow
again, in order to return the pin to its original position.
Please note that the camera cannot be mounted if the pin
remains in the center.

Attaching the Shoulder Strap

Attach the shoulder strap to the shoulder strap bracket.
To detach the shoulder strap, first open the hooks, then
detach the strap.
Presstoopenthe
hook.
 NOTE
Makesurethattheshoulderstrapissecurelyattached.
BlackLever
ShoulderStrap