Panasonic HPX300 - Camcorder - 1080p Operating Instructions Manual page 59

3
 UseCURSORbuttonstosettheuserbits.
UB PRESET
+/- : PUSH
SEL : PUSH
PRESET : PUSH SET
q button: Shifts the target (highlighted) digit to the
right.
w button: Shifts the target (highlighted) digit to the
left.
e button: Increases the highlighted number by one.
r button: Decreases the highlighted number by
one.
SET button: Confirms the set user bits.
• Pressing the RESET button while setting the user
bits will reset any user bit setting to 0.
4
 PresstheSETbuttontoconfirmtheuserbit
value,andpositiontheTCGswitchatF-RUNor
R-RUN.
 NOTE
Changing the TCG switch setting without pressing the
SET button disables the set value.
5
 OpenthesettingmenuRECORDINGSETUP
screenandsetthemenuoptionUBMODEto
USER.
Retaining the user bits
The data set for the user bits are automatically saved and
retained even if the video camera-recorder is turned off.
/
/
Frame rate information recorded in user
bits
The frame rate value of video data captured and recorded
at a frame rate set in the menu option FRAME RATE
or other options in the SYSTEM SETUP screen can be
recorded in the user bits and be used in editing equipment
(computer editing software).
This type of data is recorded in VITC UB at all times.
Setting the setting menu UB MODE to FRM RATE, records
the information also to the user bits.
In playback of clips recorded in native mode, the same
frame rate information as that obtained in playing back the
user bits in the VIDEO AUX area is also output to the user
bits in the subcode area.
Frame rate information
Frame rate, video pull-down and time code user bits are
related as described below.
Verification Fixed
informationon value
theright-hand
sixdigits
SequenceNo.P,PA:0-
Otherthanabove:lockedatF
Cameracapturemode
Example:
•  0i:00
•  0P:0
•  0P:0
•  P:
•  PA:C
•  PN:C(recording)
•  P:(0P/0PNor0PVFR)
•  P:D(0P/PNVFRrecording)
When100ior0i
Framerate:Pover0i(:)
Time code digit
00 01 02 03 04 05 06
Video
Ao Ae Bo Be Bo Ce Co De Do De Ao Ae Bo Be
Sequence No.
0 1 2 3 4 0 1
Updated frame information
10 10 01 01 00 10 10
Framerate:PAover0i(:::)
Time code digit
00 01 02 03 04 05 06
Video
Ao Ae Bo Be Bo Ce Co Ce Do De Ao Ae Bo Be
Sequence No.
0 1 2 3 4 0 1
Updated frame information
10 10 01 00 10 10 10
Mediamanagementdata
• U pdateframeflag,active
frameflag
• R ECmark
First field of updated frame rate
23 24 25 26 27 28 29
Co De Do De Ao Ae Bo Be Bo Ce Co De Do De
3 4 0 1 2 3 4
01 00 10 10 01 01 00
23 24 25 26 27 28 29
Co Ce Do De Ao Ae Bo Be Bo Ce Co Ce Do De
3 4 0 1 2 3 4
00 10 10 10 01 00 10