Panasonic HPX300 - Camcorder - 1080p Operating Instructions Manual page 94

 NOTE
• The camera can load up to 8 files.
When an attempt is made to load a new file while 8 files have
already been loaded, "READ NG CAC FILE FULL" appears. To
load a new file, delete an existing file before loading the new
file.
For details, see [Deleting CAC File] (this page).
• "READ NG FORMAT ERROR" indicates the file cannot be
used and will not be loaded. Make sure the file is in a format
the camera supports and that the file on the SD card is not
corrupted.
Deleting CAC File
1
 OpentheLENSSETUPscreen.
For details on menu operation, refer to [Using the
menus] (page 120).
2
 UsetheJOGdialbuttontoselectCACFILE
DELETE,selectEXECUTEandpresstheJOG
dial.
LENS SETUP
SHADING SELECT
SHADING(USER)
CAC
CAC PROPERTY
CAC CARD READ
CAC FILE DELETE
CAC FILE INIT
IRIS ADJUST
PUSH MENU TO RETURN
3
 UsetheJOGdialtoselecttheCACfiletobe
deleted.ThenselectYESandpresstheJOG
dialbutton.
"-----" is indicated when deletion ends.
CAC FILE DELETE
1:XT17X4.5BRM-K14
2:
3:
4:
5:
6:
7:
8:
PUSH MENU TO RETURN
CAC FILE DELETE
CAC FILE NO:1
YES
NO

DEFAULT
>>>
ON
>>>
>>>
RETURN
EXECUTE
>>>
DELETE?
PUSH SET
Initializing CAC File (Returning Data to
Their Factory Defaults)
1
 OpentheLENSSETUPscreen.
For details on menu operation, refer to [Using the
menus] (page 120).
2
 UsetheJOGdialbuttontoselectCACFILE
INIT,selectEXECUTEandpresstheJOGdial.
LENS SETUP
SHADING SELECT
SHADING(USER)
CAC
CAC PROPERTY
CAC CARD READ
CAC FILE DELETE
CAC FILE INIT
IRIS ADJUST
PUSH MENU TO RETURN
3
 SelectYESintheconfirmationscreenand
presstheJOGdialbutton.
• CAC FILE INIT  PROCESSING  COMPLETED
(these three appear in succession) to indicate that
initialization has been completed.
• The LENS SET UP screen appears after
completion.
CAC FILE INIT
CAC FILE INITIAL?
YES
NO
 NOTE
This operation deletes all files loaded into the camera and
returns the four CAC data files to their factory defaults.
DEFAULT
>>>
ON
>>>
>>>
>>>
RETURN
EXECUTE
PUSH SET