Adjusting And Setting The Lcd Monitor - Panasonic HPX300 - Camcorder - 1080p Operating Instructions Manual

Adjusting and setting the LCD monitor

Using the LCD Monitor
1
 TurnonthePOWERswitchoftheAG-
HPX00P.
2
 SlidetheOPENbuttoninthearrowAdirection
toopentheLCDmonitor.
 NOTE
The LCD monitor opens to an angle of 120 degrees.
Attempts to open it further will damage the monitor.
3
 AdjusttheangleoftheLCDmonitorformost
convenientviewing.
• The monitor can turn up to 180 degrees towards
the lens and up to 90 degrees towards you.
 NOTE
To prevent camera-recorder failure, do not use force
when adjusting the monitor (when open).

4
 UsethesubscreeninthemenuoptionLCD
SETTINGintheDISPLAYSETUPscreen
toadjustscreencolorlevel,brightnessand
contrast.
For details on menu operation, refer to [Using the
menus] (page 120).
• At LCD SETTING of the DISPLAY SETUP screen,
select CHANGE.
DISPLAY SETUP
MARKER
SAFETY ZONE
FOCUS BAR
LCD SETTING
SELF SHOOT
LCD BACKLIGHT
SYNC SCAN DISP
DATE/TIME
PUSH MENU TO RETURN
5
 UsetheJOGdialbuttontoselectanitem.
LCD SETTING
LCD COLOR LEVEL
[ ]
LCD BRIGHTNESS
[ ]
LCD CONTRAST
[ ]
PUSH MENU TO RETURN
6
 PresstheJOGdialbutton,andturntheJOG
dialbuttontoadjusttheselecteditem.
LCD SETTING
LCD COLOR LEVEL
[ ]
LCD BRIGHTNESS
[ ]
LCD CONTRAST
[ ]
PUSH MENU TO RETURN
 NOTE
• Pressing the RESET button when a value that can be
adjusted is selected in the setting menu LCD SETTING will
return the setting to its factory default.
• When closing the LCD monitor make sure that it is shut tight.
• In an environment with sudden temperature changes,
condensation may form on the liquid crystal surface of the
monitor. If this happens, wipe off the moisture with a soft, dry
cloth.
ON
90%
ON
RETURN
CHANGE
NORMAL
sec
OFF
[+]
[+]
[+]
[+]
[+]
[+]