Connecting The Fm Antenna; Connecting To The Assistance Equipment - Hitachi AX-M910 Instruction Manual

Connecting the FM Antenna

FM outdoor antenna
Coaxial Cable
Connecting auxiliary equipment
Auxiliary equipment's
terminal board
Auxiliary equipment
Using the supplied wire Antenna
Using the coaxial type connector
A 75 ohm antenna with coaxial type connector should be con-
nected to the FM 75 ohm coaxial terminal.
If reception is poor, connect the outside antenna.
Note: Before attaching a 75 ohm coaxial lead (the kind with a
round wire going to an outside antenna), disconnect the sup-
plied FM wire antenna.
Caution: To avoid noise, keep antennas away from the system,
the connecting cord and the AC power cord.
Terminal board
for the DVD player
Auxiliary equipment
Terminal board
for the DVD player
Auxiliary equipment's
terminal board
This DVD player has a group of audio input
terminals, you can use signal line to connect
audio input terminals of this unit and audio
output terminals of auxiliary equipment
respectively, then you can hear the sound
sources.
This unit also has a group of audio output
terminals, you can use signal line to connect this
unit's audio output terminal and auxiliary
equipment's audio input terminal respectively,
then you can output the sound sources to other
auxiliary equipment.
- 9 -