Connecting The Antenna; Connecting Sub-Woofer; Connecting Aux - Hitachi AX-M138 Instruction Manual

Connecting the Antenna

Connect the supplied antenna to the antenna
socket on the terminal board of the sub-woofer.
Tighten the antenna rod
clockwise on the base of
the antenna

Connecting Sub-Woofer

Connect signal line between the main set and the sub-woofer back board.
Terminal board for Main Set
Note: The smaller end of the signal line shall be plugged into socket of the main set terminal board and the
other end with two screws shall be tighten to the terminal board of the sub-woofer.

Connecting AUX

This sub-woofer has a group of audio input terminals, you can use signal line to connect audio input
terminals of this unit and audio output terminals of other equipment respectively, then you can hear the
sound sources.
The antenna should be connected to the antenna socket,
tighten the antenna by hand with tool supplied. (Please
note: Do not overtighten,this could damage the antenna
or it's fittings.)
Position the antenna for the best reception.
Warning: The antenna supplied has a magnetic base. It must not be
placed on any products that are sensitive to magnetism, such
a TV's and computers as this may cause damage.
- 9 -
Terminal board for Sub-Woofer