Adjusting The Monitor Screen - Compaq V55 User Manual

Adjusting the
Monitor Screen
Optimizing Contrast
Optimizing Focus
Allow the monitor to warm up for 30 minutes before
performing the following procedures. The screen image
stabilizes after a warm-up period.
For best results, set your screen to a dark background (such as
the DOS prompt) before adjusting the following settings:
1. Set the brightness and contrast controls to their lowest
settings.
2. Increase brightness until the background portions of the
screen are visible, then slowly reduce brightness until the
background is just extinguished.
3. Adjust contrast control to your preference.
The default image size is preset at the factory. The Horizontal
and Vertical Size and Position controls located on the front
control panel can be used to increase the screen size beyond the
default setting. However, increasing the screen image beyond
the default settings may degrade the focus at the outer edge of
the screen.
To enhance focus, use the lowest brightness level that gives
satisfactory results in your viewing environment.
Settings that maximize contrast may not offer optimum focus,
and settings that maximize focus may not offer optimum
contrast.
English 1-9