Adjusting Screen Quality - Compaq TFT8000 User Manual

Adjusting Screen Quality

Allow the monitor to warm up for 20 minutes before performing the
following procedures. The screen image stabilizes after a warm-up period.
Use the Compaq LCD Display Assistant utility included on the
INF/ICM diskette to adjust the screen quality of your monitor. It
provides on-screen instructions. To install this utility onto your
computer, follow the instructions on the "Configuring Your
Compaq LCD Monitor" card located in the Program License
Agreement envelope.
Optimizing Digital Conversion
This monitor contains advanced circuitry that allows the flat panel screen to
function like a standard monitor. Three controls in the on-screen display can
be adjusted to improve image performance or digital conversion: Clock,
Clock Phase, and Clock Phase Fine.
IMPORTANT: The Clock must first be set correctly since the Clock Phase
settings are dependent on the main Clock setting.
Clock—Increase/decrease the value to minimize any vertical bars or
stripes visible on the screen background.
Clock Phase—Increase/decrease the value to minimize video
distortion or video jitter.
Clock Phase Fine—Increase/decrease the value to fine-tune or focus
the display.
When adjusting the Clock and Clock Phase values, if the monitor
images become distorted, continue adjusting the values until the
distortion disappears. To restore the factory settings, select Reset
from the Factory Reset menu in the on-screen display.
1-14 English