Compaq V55 User Manual page 6

USB Connectors
The base of the monitor has two Universal Serial Bus (USB)
connectors. Use connector
to the computer. Use connector
plug and play devices such as a keyboard, mouse, or joystick if
supported by your computer. This feature provides USB pass-
through and does not support USB host requirements.
These USB connectors operate as a pass-through system. Your
computer must have a USB host controller installed for any
USB-connected devices to operate.
to connect the USB signal cable
CAUTION:
This USB connector is not designed for use with high
speed USB devices such as a video camera, scanner, etc. Compaq
recommends connecting high speed devices directly to the computer.
CAUTION:
To prevent deterioration of signal transfer or malfunction of
USB devices, USB cables should not exceed the combined length of 9.75
feet (3.0 meters).This length includes both the USB signal cable and the
USB peripheral cable.
to connect USB compatible
English 1-5