Adjusting Screen Quality; Optimizing Digital Conversion - Compaq Monitor TFT5015s User Manual

14. Set the Timer mode to On to activate the Sleep Timer
settings.
15. When you are finished, select Save and Return to exit the
Menu.
The fifth selection Sleep Now turns the monitor backlights off
immediately and stays in Sleep mode until the next On Time
activates or a monitor button is pressed.

Adjusting Screen Quality

Allow the monitor to warmup for 20 minutes before performing
the following procedure.
If image quality improvement is desired, select "Auto Adjust" in
the OSD, using the Minus (-) button. For more precise
adjustments, adjust the Clock and Clock Phase controls explained
in the Optimizing Digital Conversion section of this manual. For
additional explanation of these controls, use the Compaq LCD
Display Assistant utility on the CD-ROM included with this
monitor.
Note: The Compaq LCD Display Assistant utility is used to
adjust the screen quality of your monitor. This utility provides
on-screen instructions. To install this utility onto your computer,
follow the instructions on the "Configuring Your Compaq LCD
Monitor" card located in the Program License Agreement packet.

Optimizing Digital Conversion

Two controls in the on-screen display can be adjusted to optimize
image performance: Clock and Clock Phase.
Important: The Clock must first be set correctly since the Clock
Phase settings are dependent on the main Clock setting.
Compaq TFT5015 User's Guide 17