Advertisement
Quick Links
N
OTICE
The information in this guide is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LI-
ABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMIS-
SIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE FUR-
NISHING, PERFORMANCE, OR USE OF THIS MATERIAL.
This guide contains information protected by copyright. No part of
this guide may be photocopied or reproduced in any form without
prior written consent from Compaq Computer Corporation.
© 1997 Compaq Computer Corporation.
All rights reserved. Printed in Taiwan.
Compaq, Deskpro, and QVision are registered in the
U. S. Patent and Trademark Office.
Microsoft, MS-DOS, Windows, Windows NT, and other names of
Microsoft products referenced herein are registered trademarks of
Microsoft Corporation.
Product names mentioned herein may be trademarks and/or regis-
tered trademarks of their respective companies.
The software described in this guide is furnished under a license
agreement or nondisclosure agreement. The software may be used or
copied only in accordance with the terms of the agreement.
User's Guide
Compaq V40 Color Monitor
Second Edition (September 1997)
First Edition (June 1997)
Part Number 295503-002
Compaq Computer Corporation
English
1-1
Advertisement
Related Manuals for Compaq V40
Summary of Contents for Compaq V40
- Page 1 Compaq Computer Corporation. © 1997 Compaq Computer Corporation. All rights reserved. Printed in Taiwan. Compaq, Deskpro, and QVision are registered in the U. S. Patent and Trademark Office. Microsoft, MS-DOS, Windows, Windows NT, and other names of Microsoft products referenced herein are registered trademarks of Microsoft Corporation.
- Page 2 English...
- Page 3 UIDE The Compaq V40 Color Monitor is a noninterlaced color monitor that automatically locks in on the most common display modes. The visible image size (VIS), the actual viewing area of the screen, is 13.1 inches (33.3 cm). Some of the monitor features include: VGA and SVGA support, and a maximum noninterlaced resolution of 1024 x 768.
- Page 4 Installing the Base Pedestal To install the base pedestal, follow the steps below: 1. Turn the monitor upside down. 2. Position the base pedestal with the latch facing the back of the monitor. 3. Insert the six tabs on the base pedestal into the six slots found on the bottom of the monitor.
- Page 5 3. Connect one end of the monitor power cord to the connector on the back of the monitor, and the other end to a properly grounded electrical outlet that is easily accessible and located as near to the monitor as possible. NOTE: Depending on your geographic location, the power cord for your monitor may be different from the one in the illustration.
- Page 6 Front Panel Controls Front Panel Controls Icon Control Function Vertical Position Centers the image vertically. Vertical Size Sizes the image vertically. Horizontal Position Centers the image horizontally. Horizontal Size Sizes the image horizontally. Contrast Adjusts the screen contrast. Brightness Adjusts the screen brightness. Power Switch Turns the monitor on and off.
- Page 7 If the monitor is not operating properly, or has been dropped or damaged, contact your Compaq authorized dealer, reseller, or service provider. Shipping or Packing Keep the original packing box in a storage area. You may need it later if you move or ship your monitor.
- Page 8 ONITOR PECIFICATIONS Specifications CRT size 14-inch diagonal 35.6 cm CRT description 90 degrees deflection, polished or nonglare/antistatic (MPR compliant) screen, black matrix, light transmission 57%, phosphor P22 medium short, dot pitch 0.28 mm Screen area (14-inch) 250 mm (H) × 188 mm (V) Diagonal visible image area 13.1 in 33.3 cm...
-
Page 9: Agency Regulatory Notices
Modifications The FCC requires the user to be notified that any changes or modifi- cations made to this device that are not expressly approved by Compaq Computer Corporation may void the user’s authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations. - Page 10 Règlement sur le matériel brouilleur du Canada. German Ergonomics Notice Compaq computers, when tested with Compaq Series 613 monitors, were evaluated and found compliant to the requirements of ZH1/618 in the Text Mode (720 x 400) using MS-DOS Version 3.31 (or higher) and BASICA as published by Compaq Computer Corpora- tion.
- Page 11 Monitors that are marked with the Energy Star Logo meet the requirements of the EPA Energy Star program. As an Energy Star partner, Compaq Computer Corporation has determined that this product meets the Energy Star guidelines for energy efficiency when used with a computer equipped with Display Power Management Signaling (DPMS).
- Page 12 3. The cord set must have a current capacity of at least 10 amperes and a nominal voltage rating of 125 or 250 VAC, as required by each country’s power system. For more information about power cord set requirements, contact your Compaq authorized dealer, reseller, or service provider. 1-12 English...
Need help?
Do you have a question about the V40 and is the answer not in the manual?
Questions and answers