Additional Functions; My Cycle - Kenmore 4885 - Rear Control High Efficiency 3.6 cu. Ft. Capacity Front Load Washer Use & Care Manual And Installation Instructions

ADDITIONAL FUNCTIONS
The option buttons also activate special functions,
including CHILD LOCK and CLEAN WASHER. Press and ®
hold the option button(s) marked with the special function
for 3 seconds to activate.
CHILD LOCK
Use this option to prevent
settings from being changed
while the washer is operating.
Press and hold the SOIL
LEVEL and CYCLE SIGNAL
buttons for 3 seconds to activate or deactivate CHILD
LOCK.
The lock icon will be shown in the display, and all controls
are disabled. The washer can be locked only during a
cycle. Once CHILD LOCK is selected, the display will
alternate between CL and the estimated time remaining.
CLEAN WASHER
A buildup of detergent residue can
occur in the wash tub over time and
c_ea, Washert can lead to a mildewy or musty
er_,,&Ho=dase_ smell. The CLEAN WASHER cycle
is specially designed to remove this
buildup. The CLEAN WASHER cycle should be run once
a month, or more often under heavy use conditions or if
odor is present.
_1 Press and hold the EASY SPIN button for 3 seconds
to activate this cycle.
OI Fill the bleach dispenser to the MAX line with liquid
chlorine bleach.
O Press the Cycle Selector Knob to start the cycle.
After the cycle has ended, open the door and allow
the drum interior to dry completely.
MY CYCLE allows you to store a frequently used
wash cycle for easy selection and use. It allows
you to save favorite temperature, spin speed, soil
level, and other options for a cycle, and then
recall them at the touch of a button.
To store My Cycle:
0 Select a cycle.
_t Adjust the Wash/Rinse Temperature, Spin Speed,
and Soil Level to the desired settings.
O
O
Set any other desired options.
Press and hold the MY CYCLE button for 3 seconds.
You will hear two beeps to confirm the settings have
been stored.
IMPORTANT: If you press and hold the MY CYCLE button
for 3 seconds, you will overwrite any previously stored MY
CYCLE.
To recall MY CYCLE:
Press and release the MY CYCLE button. The stored
settings will be displayed.
Press and release the START/PAUSE button to start
the cycle. The washer will start automatically.
NOTE: Once the MY CYCLE has been recalled, any of
the memorized modifiers or options can be adjusted.
However, if the Cycle Selector knob is rotated, the MY
CYCLE will be canceled and the dial selection will be
displayed.
NOTE: Do NOT use this cycle with clothes, and do NOT
add detergent or fabric softener.
21