Clarity E814 User Manual page 31

using your e814
1. Press <oK/menU> and <UP/down> to select Answering sys.
2. Press <oK/menU> and <UP/down> to select Ans sys setup.
3. Press <oK/menU> and <UP/down> to select Voice language.
4. Press <oK/menU> and <UP/down> to select your desired language.
5. Press <oK/menU> to confirm; display shows Saved.
Turn on or off the Call screening
You can select to turn on or off the call screening on base.
1. Press <oK/menU> and <UP/down> to select Answering sys.
2. Press <oK/menU> and <UP/down> to select Ans sys setup.
3. Press <oK/menU> and <UP/down> to select Call screening
4. Press <oK/menU> and <UP/down> to select ON or OFF.
5. Press <oK/menU> to confirm; display shows Saved.
Change remote access code
Your phone lets you check your messages or operate your answering machine by
calling the answering machine when you are away from home and the Remote Access
is turned on. Default setting from factory for the remote access pin is "19".
1. Press <oK/menU> and <UP/down> to select Answering sys.
2. Press <oK/menU> and <UP/down> to select Ans sys setup.
3. Press <oK/menU> and <UP/down> to select Remote code.
4. Press <oK/menU> and use the numeric keypad to enter a new 2-digit remote
access code.
5. Press <oK/menU> to confirm; you will hear a confirmation beep.
Turn on of off the message alert Tone
You can select to turn on or off the message alert (for missed calls).
1. Press <oK/menU> and <UP/down> to select Answering sys.
2. Press <oK/menU> and <UP/down> to select Ans sys setup.
3. Press <oK/menU> and <UP/down> to select Msg alert tone.
4. Press <oK/menU> and <UP/down> to select ON or OFF.
5. Press <oK/menU> to confirm; display shows Saved.
31