Make A Call - Clarity E814 User Manual

using your CorDless hanDseT
To mute the call
During a call, Press <mUte/X>. When mute is on, the handset screen shows muted
for a few seconds and the mUte icon appears until you turn off mute. Or mute is auto-
matically canceled when you end the call.
note: Mute will also be canceled automatically when you press <TALK ON/ FLASH> to
answer the second waiting call.
To unmute the call
When mute is on, press <mUte/X> and then resume speaking. When mute is off,
microphone on appears temporarily on the handset screen.

maKe a caLL

Pre-dialing
Enter the phone number first, then press <taLK on/fLash> or <sPeaKer>
to dial out the number. Press <TALK OFF/CLEAR> or <mUte/X> to clear
the entry.
Direct Dialing
Press <taLK on/fLash> or <sPeaKer> to access dial tone, then enter the
phone number.
Dial a speed dial number
1. In idle mode, press and hold a dial pad key (0 through 9) to display the desired speed
dial entry.
2. The handset automatically dials out the displayed number.
–OR–
3. Press <taLK off/cLear> to stop dialing the displayed number.
note: You need to set the speed dial number first. If the speed dial location you selected is
empty, the screen shows the speed dial list instead.
Call from Directory
1. In idle mode, press <UP> to access the directory. Alternatively, press
<menU/seLect> to access the directory from the main menu.
2. Press <UP> or <down> to select the desired directory entry.
3. Press <taLK on/fLash> or <sPeaKer> to dial out to the selected entry.
46
(Purchased separately)