Connecting Other Company's Image Equipment; Other Functions - Clarion VRX938R Owner's Manual & Installation Manual

7.0" monitor, cd & rds-eon fm/mw/lw radio with navigation / cenet control
Table of Contents

Advertisement

Connecting other company's
image equipment
RGB type or composite type images from other
company's equipment can be displayed on this
unit
Be sure to perform this setting after connecting
the RGB type or composite type image equipment
to the RGB terminal.
1. When the panel is open, press the [ADJ] but-
ton to show the adjustment selection display.
2. Touch the [z] key to select "NAVI SELECT".
Touch the [NAVI SELECT] key to select the
following items:
"Clarion": Setting when Clarion NAVI is con-
nected;
"RGB": Setting when a RGB image of other
company's equipment is input;
"COMPOSITE": Setting when a composite
image of other company's equipment is in-
put.
3. Touch the [RGB] key or [COMPOSITE] key to
select "RGB" or "COMPOSITE".
Display changeover
When the panel is open, it is possible to change
over between AV display and external equipment
display using the [NVG/AV] button.
42
VRX938R

Other Functions

Always turning on the button
illumination on the operation panel
Note:
• The following operation is enabled when the panel
is open.
• Doing this operation turns on and off the illunination
only for the buttons of VoL [+] and [–], [TILT], and
[OPEN].
The button illumination on the operation panel
when the display is turned upward, can be
switched between "ON" and "OFF".
"OFF": Button illumination on the operation
panel turns on for 5 seconds;
"ON": Button illumination is always on when the
power is turned on;
1. When the panel is open, press the [ADJ] but-
ton to show the adjustment selection display.
2. Touch the [UPPER ILLUMI] key to select "ON"
or "OFF".
3. Touch the [ON] or [OFF] key for setting.
4. Press the [ADJ] button to return to the previ-
ous mode.
To set "ON" again, switch "OFF" to "ON" manu-
ally.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for TV stations and CDs.
The numbers of titles that can be entered for each
mode are as follows.
Mode
TV mode
CD mode
CD changer mode
CDC655z connected
CDC655Tz/CDZ628
connected
CDC1255z connected
You cannot enter titles with the unit in Seek, Preset
Scan, Auto store (TUNER, TV or DAB) mode. Can-
cel each of those operations before entering titles.
1. Press the [FUNC] button to select the mode
you want to enter a title (CD, CD changer or
TV).
2. Select and play a CD or a CD in the CD changer
or tune in to a TV station for which you want to
enter the title.
Number of titles
15 titles
50 titles
Number of titles
60 titles
100 titles
50 titles

Advertisement

Table of Contents
loading

Table of Contents