Table of Contents
Advertisement
3. Touch the [TITLE INDEX] key in the MENU dis-
play.
Touch the [INPUT] key in the USER TITLE dis-
play, the display switches to the title input mode
display.
4. Touch the characters, symbols, etc. shown in
the display to input titles.
" ,
"
: Centering
"BS"
: Backspace
"
"
: Space
"MEMO" : Memory
"z(w)" : Scroll
NOTE:
• Up to 10 characters can be input.
• To switch the character types, touch the scroll key
( z ) at the lower left of the display.
5. Repeat the step 4 to enter the complete title.
6. Touch the [MEMO] key for 2 seconds or longer
to store the title into memory and cancel title
input mode.
Title list play
You can display a list of titles, then select the disc
or broadcast station to listen to from that list.
You can not display a title list with the unit in Seek,
Preset Scan, Auto store (Tuner, TV or DAB mode).
Cancel those operation modes before to display a
title list.
1. With the unit in radio, CD/MD changer, TV or
DAB mode, touch the [P. CH SELECT], [DISC
SELECT] key. A title list is displayed. The fol-
lowing functions can be carried out in a title list
display.
TUNER: PS name (for RDS) of frequency
stored in the presets 1 to 6 or frequency is
displayed;
CD/MD changer: DISC titles for discs 1 to 6
are displayed (By changing over a display
page in case of 12-CD changer, disc 7 to 12
can be displayed). When there is not any disc
in a changer, "NO DISC" is displayed.
TV: A title of a channel stored in the presets
1 to 6 or a channel number is displayed.
2. Touch the [DIRECT] key (1 to 6) to select one
of the items 1 to 6 and reproduce the selected
broadcast station or disc.
In case of 12-CD changer, touch the [DISC SE-
LECT] key to change over to a list display of
discs 7 to 12.
3. Touch the [RTN] key again to return to the
STANDARD display.
Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to your
telephone calls on your car speakers.
The factory default setting is "OFF".
1. Press the [ADJ] button to switch to the adjust-
ment selection display.
2. Touch the [z] key to select "TEL SWITCH".
Touch the [TEL SWITCH] key to select "ON",
"OFF" and "MUTE".
OFF:
This unit continues normal operation even
when the cellular phone is used.
Note:
• When the setting is OFF, disconnect the cellular
phone from the cable or turn off the power of
the cellular phone.
ON:
You can listen to your telephone calls from the
speakers connected to this unit.
When listening to your calls on your car speak-
ers, you can adjust the volume by operating the
[VOL] button.
MUTE:
The sound from this unit is muted during tele-
phone calls.
3. Touch the [ON], [OFF] or [MUTE] key to select
a desired mode and set it.
4. Press the [ADJ] button again to return to the
STANDARD display.
Setting the car speaker output for
the cellular phone
The factory default setting is "RIGHT".
To output the telephone calls, set the cellular phone
interrupt to ON.
1. Press the [ADJ] button to switch to the adjust-
ment selection display.
2. Touch the [z] key to select "TEL SPEAKER".
Touch the [TEL SPEAKER] key to select
"LEFT" and "RIGHT".
LEFT:
Telephone calls can be heard on the left
speaker connected to this unit.
RIGHT:
Telephone calls can be heard on the right
speaker connected to this unit.
3. Touch the [LEFT] or [RIGHT] key to select a
desired mode and set it.
Other Functions
43
VRX938R
Advertisement
Table of Contents
