Hitachi VT-FX980EUKN Instruction Manual page 25

VIDEO LINK
COMMERCIAL ADVANCE
PROG
CA
VIDEO LINK
PROG
ENTER
REC INDEX
REV FWD
VIDEO
ENTER TRANS 4
1
PLUS
2 1 2 3
4 5 6
DLY/WKL CL
7 8 9
0
PROG AUX
SP/LP EXTEND
3
VCR1/2/TV CLOCK
PDC CORRECT
MENU
CLOCK
COUNT DISP 0000
CH1/2
A. DUB V. DUB
CH1/2
REV FWD
Notes:
• If there is a noise bar in the picture during still
or slow motion play, press the PROG button (
REV FWD
or
TAPE
NAVIGATION
REC/
IRT
noise.
• To prevent tape damage, the VCR will switch
from still/slow mode to stop mode after about 1
minute.
Auto Tracking
When you insert a tape that has not been recorded
by this VCR, auto tracking operates automatically.
If you want to auto tracking again, press the play
button on the remote control during playback.
• Auto tracking may not operate when a tape
recorded on this VCR is inserted.
• Auto tracking may not operate correctly when
the tape is scratched or the recorded condition
is poor. In this case, press the PROG button (
or
CH1/2 select button
When playing stereo or monaural tapes
Press the CH1/2 select button on the remote
control handset so that both the
indicators on the front panel of the VCR light.
• When only the
the left (or right) audio channel of the Hi-Fi track
is heard.
• When both
the sound on the mono audio track is heard.
When playing back bilingual broadcasts
Select the required language by pressing the
CH1/2 select button.
• When only the
language is heard.
• When only the
language is heard.
• When both
language and sub language are heard.
• When both
mono audio track is heard.
) on the VCR to adjust tracking and reduce
) on the VCR to adjust tracking manually.
CH1/2
(or ) indicator lights, only
and indicators do not light,
indicator lights, the main
indicator lights, the sub
and indicators light, the main
or indicators do not light, the
and
25