Table of Contents
Advertisement
6
Confirm with
on the video recorder-remote control.
OK
The video recorder compares the TV channels on the TV
set and the video recorder.
When the video recorder finds the same TV channel as
the TV set, then it stores it at 'P01'.
Note: When 'NOTV' (no signal from TV set) appears in the
display, the TV channels can not be allocated automatically.
In this case, read paragraph: 'Manual TV channel
allocation'.
7
Wait until e.g.: 'TV02' appears.
8
Select the next programme number, e.g.: '2' on the TV set.
9
Confirm with
on the video recorder-remote control.
OK
Note: If you have allocated the wrong TV channel, you can
go back one step with
CLEAR (CL)
0
7
0
Repeat steps
to
allocated.
A
To end, press
.
MENU
Automatic TV channel search (Autoinstall)
The video recorder will search for all TV channels. It stores TV
channels found in the following sequence: BBC 1, BBC 2, ITV,
CH 4, CH 5, SKY, others.
Note: If you want to start the automatic TV channel search
again, then follow the instructions below.
1
Switch on the TV set. If required, select the programme
number for the video recorder.
2
Press
on the remote control. The main menu will
MENU
appear.
Select the line 'AUTO INSTALL' with
3
4
Press
. The 'Automatic TV channel search' starts.
OK
AUTO INSTALL
SEARCHING
00 TV CHANNELS FOUND
ƒƒƒƒƒƒƒ__________________
PLEASE WAIT...
Wait until all TV channels have been found. This can take
several minutes.
.
until all TV channels have been
P- =
or
;P+
5
When Autoinstall is complete, 'STORED' will briefly
appear on the TV screen.
The time and date information have been set.
6
To end, press
MENU
How to search for a TV channel manually, you can read in the
section 'Manual TV channel search'.
Monitor function
You can switch backwards and forwards between TV picture
and video recorder picture with
when you use a scart cable to connect the video recorder to
your TV set and if your TV set responds to this switch-over.
You can also use
VCR/TV
Sorting and clearing TV channels manually
You can assign any programme number to a TV channel that
you have stored and you can also delete unwanted TV
channels.
1
Switch on the TV set. If required, select the programme
number for the video recorder.
2
Press
on the remote control. The main menu will
MENU
appear.
Select the line 'TV CHANNEL ALLOC.' with
3
.
;P+
4
Confirm with
OK
TV CHANNEL ALLOC.
ALLOCATE ON
TV CHANNEL
.
________________________________
ALLOCATEpSELECT
5
With
or
, select the TV channel you want to
P
Q
assign a programme number to (starting with 'P01').
Note: If you want to delete a TV channel, press
6
Confirm with
SELECT
appear on the TV screen: e.g.: 'BBC1 ALLOCATED
ON P01'.
Note: When you have assigned a programme number to the
last TV channel, you will automatically return to the main
menu when you confirm with
.
MENU
.
. But this only works
VTR/TV
on the video recorder.
.
P01
è
BBC1 p
EXITpMENU
CLEAR (CL)
. The following message will briefly
. To end, press
SELECT
or
P- =
.
7
Advertisement
Table of Contents
