Table of Contents
Advertisement
The symbols on your video recorder display
These symbols can light up on your video recorder display:
This is where the current operating mode is shown
as a symbol.
LP
When you have switched on the LP (Long Play)
function or when you play a tape that has been
recorded in LP (Long Play).
When you have switched on the child lock.
When a satellite recording has been programmed.
DEC
When a decoder has been allocated to the TV
channel you have currently selected.
When you play a cassette that has been recorded
with hifi sound, or when a hifi sound is transmitted.
When you are making a recording.
k
When you have programmed a recording or when
a programmed recording is being made.
D
When you are programming daily recordings.
W
When you are programming weekly recordings.
When you have put a cassette in the video
recorder.
DATE
When the date of the programmed recording is
shown.
START
When the start time of the programmed recording
is shown.
PROG.
When the programme number of the programmed
recording is shown.
END
When the end time of the programmed recording
is shown.
VPS/PDC Video Programming System / Programme Delivery
Control: when a VPS or PDC code is being
transmitted.
Display of programme number / tape position /
channel name / function.
Tape position in seconds, but only if the display
mode 'LINEAR' has been selected.
10
Advertisement
Table of Contents
