Connecting Without A Scart Cable; Connecting Other Equipment - Hitachi VTFX940EUKN Operating Instructions Manual

7
If your TV set automatically switches to programme
number e.g.: 'EXT', '0', or 'AV', this text will appear on the
TV screen:
CONGRATULATIONS
YOU NOW OWN A NEW
VIDEO RECORDER
Note: If your TV set does not switch to programme number
e.g.: 'EXT', '0', or 'AV' automatically, select the programme
number for the video recorder manually (see instruction
manual TV set).
8
When the TV has been tuned read the paragraph 'Initial
installation' in the chapter 'INSTALLING YOUR VIDEO
RECORDER'.

Connecting without a scart cable

1
Switch off the TV set.
2
Remove the aerial cable plug from your TV set and insert
it into the socket at the back of the video recorder.
2
3
Plug one end of the aerial cable provided into the
socket on the video recorder and the other end into the
aerial input socket on your TV set.
4
Insert one end of the mains cable into the mains socket
at the back of the video recorder and plug the other
4
end into the wall socket.
5
Switch on your TV set and select the programme number
that you have chosen for video playback (see instruction
manual TV set).
6
Tune in the TV set until this picture appears.
4
CONTINUEpOK
3
Note: The video recorder will now transmit on channel 35 or
583MHz.
CONGRATULATIONS
YOU NOW OWN A NEW
VIDEO RECORDER
Note: If the picture quality of TV channels on your TV is
poor, please read the section 'Reducing picture disturbance
- optimizing the modulator' in the chapter 'ADDITIONAL
FUNCTIONS'.
7
When the TV has been tuned read the paragraph 'Initial
installation' in the chapter 'INSTALLING YOUR VIDEO
RECORDER'.

Connecting other equipment

You can connect additional equipment to the
For example: a decoder, a satellite receiver or a camera
recorder.
You can connect a hifi-stereo set to the socket
(audio output left/right).
AUDIO OUT L R
CONTINUEpOK
socket.
AV2 EXT2