Table of Contents
Advertisement
6.
PROGRAMMED RECORDING (TIMER)
Use programmed recording to automatically start and stop a
recording at a later date.
To make a programmed recording, your video recorder needs
to know:
* the date you want to make the recording;
* the programme number for the TV channel you want to
record;
* the start and stop time of the recording;
The video recorder stores all the information in a TIMER block.
You can programme up to 6 TIMER blocks a month in advance.
'VPS' (Video Programming System) and
'PDC' (Programme Delivery Control)
With 'VPS and PDC', the TV station controls the start time and
the length of the recording. This means that the video recorder
switches itself on and off at the right time even if a TV
programme you want to record begins earlier or finishes later
than expected.
You must enter the start time exactly to the minute.
If you want to programme a time that is different from the VPS
or PDC time, you must switch off VPS or PDC.
Programming a recording
(with 'VIDEO Plus+')
All the information required for a programming is contained in
the PlusCode-programming number.
1
Switch on the TV set and select the programme number
for the video recorder.
2
Press
on the remote control.
TIMER
3
Enter the entire PlusCode programming number (up to 9
digits) printed in your TV guide next to the start time of a
TV programme.
For example, 5-234-89 or 5 234 89
Enter 523489 for the PlusCode programming number.
18
Note: If you make a mistake, you can clear your instructions
with
.
CLEAR (CL)
VIDEO PLUS+
PLUSCODE NUMBER
53124----
________________________________
REP.pSELECT
TIMER LISTpTIMER
4
Use
to select daily or weekly programming.
SELECT
'ONCE': Recording once
'MO-FR': Recordings every day from Monday to Friday.
'WEEK.': Recordings every week on the same day of the
week.
5
Confirm with
. Your programming details will then
OK
appear on the TV screen.
TIMER
DATE REP. PROG. START PDC
21 MO-FR
01
________________________________
Note: If VIDEO Plus+ does not recognise the TV channel,
'SELECT PROG. NR.' will appear on the TV screen.
Select the programme number (channel name) you want
with the number buttons
0-9
button.
* If 'PLUSCODE NUMBER NOT VALID' appears on the
TV screen, this means you entered an incorrect PlusCode
number or the incorrect date for the recording. The start of
the programmed recording must be within the next 7 days.
Correct your instructions or end with
* If 'MO-FR PROGRAMMING NOT POSSIBLE FOR
WEEKEND' appears on the TV screen, you have
programmed a the wrong day for the daily recording. Daily
programming can only be used for recordings to be made
from Monday to Friday.
* Under 'START', use
SELECT
If ']' appears on the screen, the function has been switched
on.
6
Confirm with
when the information is correct.
OK
Note: The programming information has been stored in a
TIMER block.
REP.
ONCE
STOREpOK
VPS
END
20:00
]
21:30
STOREpOK
and confirm with the
OK
.
TIMER
to switch 'VPS/PDC' on or off.
Advertisement
Table of Contents
