Parental Locking; Menu Lock; Set Pin; Language - Hitachi HDR505 Instruction Manual

Do not forget to re enable the automatic OAD function
after you have made your recording by repeating the
above instructions but this time selecting ENABLE.

Parental Locking

Use " "/" " buttons to go to Parental Lock option.
Press OK button to enter the menu. A box asking for
the lock key is displayed. The key is set to "0000"
initially. Enter lock key. If it is incorrect, "Wrong Pin"
is displayed. If it is correct, the Parental Control Menu
is displayed.

Menu Lock

In menu lock you can set locking for All Menus, or the
Installation Menu to restrict access to these menu's. If the
menu lock is disabled, there will be free access to the menu
system. Use " "/" " buttons to go to Menu Lock option.
Use " "/" " buttons to choose Menu Lock Mode.
DISABLED : All menus are unlocked.
ALL MENUS : All Menus are accessible only with the
correct lock key.So the user can't add, delete, rename,
channels, can't set timers.
INSTALLATION MENU : Installation menu is locked.So
the user can't add channels. Changes will be updated after
exiting 'Confi guration Menu'.

Set Pin

The PIN code of the unit changed. Use " "/" " buttons to
go to "Set PIN" option. Press OK to display the "Set PIN"
window. Use NUMERIC buttons to enter new pin number
you will need to input your new pin a second time for
verifi cation purposes. If Both pin numbers are four digits
long and the same, the pin will be changed. The factory
default pin number is 0000, if you change the pin number
make sure you write it down and keep it safe.

Language

In this menu the user can adjust the preferred language.
Language is changed by pressing OK key.
Menu: shows the language of the system
Preferred
These settings will be used if available. Otherwise the
current settings will be used.
• Audio: by pressing " "/" " keys change the audio
language.
• Subtitle: alter the subtitle language with " "/" " keys.
The chosen language will be seen in subtitles.
• Guide: by pressing " "/" " keys change the guide
language.
Current
• Audio: if audio language is supported change the
audio language by pressing " "/" " keys
• Subtitle: if subtitle is backed up alter the subtitle
language with " "/" " keys. The chosen language will
be seen in subtitles.

Installation

Automatic Channel Scan / Retune

Automatic channel scan is activated by selecting OK
when the line is highlighted. A pop-up menu appears
on the screen, select "YES" the automatic scan
begins. All the multiplexes are searched and a channel
table is created automatically. All channels found are
stored in a sorted form with respect to their channel
numbers. Selecting "NO" will cancel the operation.
Note : When the search progress is completed, a
message will be displayed on the screen saying
"System will be restarted to save changes". Please
press OK, and after 3-5 seconds the box will restart.
You can watch saved broadcasts after the restart
process.
English - 18 -