Autodesk 00126-050008-1620A - Autocad 2006 Essentials User Manual page 212

WiseImage – User's Guide
5 Click the
on those symbol template objects, which should be the connecting lines. The
connecting line is highlighted with red color. If the object is assigned by a line
of connection by mistake, then click on it once more to deselect. The object
color will be changed to the original one.
Þ Note that the line of connection should be a segment with one end adjoining
to template objects, and another being free. Otherwise, the program will not
assign the object to the connecting line.
Raster symbol template
Raster symbol templates are marked with
When raster symbol template is added to the library as Replace item, SRTL does
not automatically create a corresponding to it Search item. This should be done
manually.
A raster symbol template could be added as Search item for raster or
vector Replace item. However, it is not possible to add a vector symbol
template as a Search item for a raster Replace item.
To create new raster symbol template
1 Open a raster image and select some raster objects, using standard raster
selection procedures. Because of SRTL editor window is modeless, these
operations can be done even while this dialog is open.
2 To add selection as Replace template click the
The raster selection pattern will be included into SRTL.
To add raster selection as Search template select appropriate vector or raster
Replace item in the left dialog window, because the Search item could be
added only to existing Replace item. Click the
The raster selection will be included as new template into SRTL. The new one
raster Search item corresponded to specified Replace item will be appeared in
the left dialog window.
SRTL editor dialog buttons and controls
Left dialog window (topological tree window)
Shows structure of current Symbol Recognition Template Library (SRTL).
Right dialog window (template window)
Shows content (template) of selected library item.
New
Creates a new empty SRTL.
Open
Load a library from *.SRT file into SRTL editor dialog.
Import
Import an old symbol template format (*.SST) in current library.
Save
Saves the active (current) library in current *.SRT file.
218
Select Connection Lines button. Click in the right dialog window
sign.
Add Replace Item button.
Add Search Item button.