HP RP3 Maintenance And Service Manual page 75

Maintenance & service guide hp rp3 retail system model 3100
Table of Contents

Advertisement

Table D-1
Numeric Codes and Text Messages (continued)
Control panel message
301-Keyboard Error
303-Keyboard Controller Error
304-Keyboard or System Unit Error
404-Parallel Port Address Conflict Detected
410-Audio Interrupt Conflict
411-Network Interface Card Interrupt
Conflict
501-Display Adapter Failure
510-Flash Screen Image Corrupted
511-CPU, CPUA, or CPUB Fan not
Detected
68
Appendix D POST Error Messages
Description
Keyboard failure.
I/O board keyboard controller.
Keyboard failure.
Both external and internal ports are
assigned to parallel port X.
IRQ address conflicts with another device.
IRQ address conflicts with another device.
Graphics display controller.
Flash Screen image has errors.
CPU fan is not connected or may have
malfunctioned.
Recommended action
1.
Reconnect keyboard with computer
turned off.
2.
Check connector for bent or missing
pins.
3.
Ensure that none of the keys are
depressed.
4.
Replace keyboard.
1.
Reconnect keyboard with computer
turned off.
2.
Replace the system board.
1.
Reconnect the keyboard with computer
turned off.
2.
Ensure that none of the keys are
depressed.
3.
Replace the keyboard.
4.
Replace the system board.
1.
Remove any parallel port expansion
cards.
2.
Clear CMOS.
3.
Reconfigure card resources and/or run
Computer Setup.
Enter Computer Setup and reset the IRQ in
Advanced > Onboard Devices.
Enter Computer Setup and reset the IRQ in
Advanced > Onboard Devices.
1.
Reseat the graphics card
(if applicable).
2.
Clear CMOS.
3.
Verify monitor is attached and turned
on.
4.
Replace the graphics card (if possible).
Reflash the system ROM with the latest
BIOS image.
1.
Reseat CPU fan.
2.
Reseat fan cable.
3.
Replace CPU fan.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rp3 3100

Table of Contents