System Board
Description
System board (includes Intel Celeron 807UE processor; includes thermal material)
The system board includes a non-removable Intel Celeron 807UE processor soldered to the board.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the riser card cage
4.
Remove the fan assembly
5.
When replacing the system board, make sure the following components are removed from the
defective system board and installed on the replacement system board:
●
Memory modules
●
Expansion cards
6.
Disconnect all data, power, and any other cables from the system board.
7.
Remove the seven screws that secure the system board to the floor of the chassis.
8.
Slide the system board tray assembly toward the front of the chassis to disengage the rear ports,
and then lift the system board up and out of the chassis.
To install the system board, reverse the removal procedure.
44
Chapter 4 Removal and Replacement Procedures
(Preparation for Disassembly on page
(Access Panel on page
Riser Card on page
(Front Fan/Baffle on page
(Memory on page
20)
(Expansion Cards on page
16).
29.
38).
22)
Spare part number
682426-001
15).