Table of Contents
Advertisement
6.
Disconnect the speaker wire from the system board connector labeled SPKR (2), and then
remove the speaker from the chassis (3).
To install the speaker, reverse the removal procedures.
Power Supply
Description
Power supply, 115W
WARNING!
active AC outlet. To avoid possible personal injury and damage to the equipment the power cord
should be disconnected from the computer and/or the AC outlet before opening the computer.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Rotate the optical drive cage to its upright position.
4.
Disconnect the power cables from all of the drives.
5.
Rotate the power supply to its upright position.
6.
Disconnect the power cables from the following white system board connectors:
●
PWRCMD
●
PWR
42
Chapter 4 Removal and Replacement Procedures
Voltage is always present on the system board when the computer is plugged into an
Access Panel on page
(Preparation for Disassembly on page
16).
Spare part number
682435-001
15).
Advertisement
Table of Contents
