Table of Contents
Advertisement
SAFETY PRECAUTIONS (continued)
Unplug the unit in the event of a lightning storm.
To reduce the risk of electric shock, do not touch the product when lightning occurs.
Do not do anything that may damage the power cord.
Do not damage, modify, twist, forcibly bend, heat, or pull excessively on the power cord.
Do not place heavy objects (including the unit itself) on top of the power cord.
If the power cord is damaged, contact your dealer for repairs or exchange.
Use only with designated power supply voltage.
To prevent the risk of fi re and electric shock, operate the product only with the power supply voltage indicated on the
unit.
Be careful not to drop or allow any impact to affect the unit.
Take extra care whilst moving the unit.
There is no protection glass on the surface of the LCD panel. Therefore do not press the panel surface with your fi ngers
or hands. Also do not hit any objects against the monitor. These actions would damage the LCD cells or the panel
surface and could cause failure or personal injury.
In the event that you drop the unit or the cabinet is damaged, unplug the power cord and contact your local dealer
immediately.
Continuing use of the product under the above conditions may cause fi re or electric shock.
Clean dust or metals from on or around the pins of the power plug regularly.
Continuing use of the product under the above conditions may cause fi re or electric shock.
Always unplug the power cord fi rst, then clean the pins using a dry cloth.
Do not place the unit on an unstable surface.
Unstable surfaces such as:
Tilted surface or shaky shelving, table, stand or trolley.
If the unit falls down, this could cause personal injury.
5
WARNING
There is a risk of fi re, electric shock or serious injury.
Disconnect the
plug from the
power outlet.
Advertisement
Table of Contents
