Adjusting Monitor Settings - EUROCOM M190S World Warrior User Manual

Advanced Controls
3
Vertical Refresh Rate
The vertical refresh rate
of your VGA monitor is
important. If it is too low
and/or you're using fluo-
rescent lighting,
screen will appear to
flicker. To reduce flick-
ering on a VGA monitor,
use faster refresh rates.
First check your moni-
tor's documentation to
make sure it can support
the rates listed by the
video driver. The default
refresh rate for VGA
monitors (without driv-
ers) is 60Hz.
Figure 3 - 9
Multimonitor VGA
Support Modes

3 - 14 Adjusting Monitor Settings

Adjusting Monitor Settings
If you prefer to use an external monitor you may change its vertical refresh
rate, color depth and resolution.
In Multimonitor Mode
1. Follow the instructions in
2. After the computer has restarted go back to the Driver Mode Setting
control panel and select the refresh rate, resolution and color depth options
the
available from the VGA drop box under Support Modes.
3. Click OK > OK > Yes to adjust and confirm the settings.
"Setting Multimonitor Mode" on page 3 - 12.