EUROCOM D400V IMPRESSA User Manual page 136

Upgrading The Computer
Contact Warning
Be careful not to touch
the metal pins on the
module's connecting
edge. Even the clean-
est hands have oils
which can attract parti-
6
cles, and degrade the
module's
mance.
Figure 6 - 5
Removing/
Installing a RAM
Module
6 - 8 Upgrading the System Memory (RAM)
5. Gently pull the two release latches (
the memory socket toward the sides of the computer.
perfor-
6. The module
7. Repeat the process for the second module if necessary.
8. Insert a new module holding it at about a 30° angle and fit the connectors
firmly into the memory slot.
&
1
1
2
3
will pop-up, and you can remove it.
3
Figure 6 - 5 )
in on the sides of
2
1