8. Remove 4 screws ( ) and then remove the Fan (G, H).
9. Reassemble the Fans in reverse order.
10. Stick the Fan Sponge around the Fan.
Note:
The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.
8.18. Removal of Speaker Assy (L,
R)
1. Remove 4 screws and then remove the Speaker Block.
2. Disconnect the Speaker lead.
• Push the speaker terminal hook and pull out the speaker
lead (+).
3. Remove the Speaker Assy from the Speaker Bracket.
8.19. Removal of C1-Board (upper)
1. Remove the Eye Bolt Cover M12 ( ).
2. Remove 2 screws ( ) and then remove the Rear Cover
Fixing Metal (upper_right).
41
TH-85PB1E