Setting The Boot Options - Epson ActionTower 8000 User Manual

Configuring PCI devices
PCI Devices
Select
screen to configure the devices connected to the PCI option
slots in your computer. These options need to be set only if you
installed older PCI devices that do not follow PCI version 2.0
specifications.
N o t e
If you installed PCI option cards in the computer before
running SETUP, the computer configures the
Devices
information returned from the PCI option cards.
The Slot #l
whether the device is a master or not, and select the timer
values for devices in slots 1 and 2.

Setting the Boot Options

When you select
see the Boot Options screen, which allows you to define the
drive boot sequence and determine which power-on diagnostic
tests the computer performs when you start your system.
The
SETUP
display of the message
appears when you turn on or reset your computer. If you
disable the message, you can still press Del to start SETUP. The
default setting is
The Boot
the computer checks the drives for an operating system when
you turn it on or reset it.
2-12 Running SETUP and Installing Drivers
from the Advanced System Setup
options automatically by detecting the
and Slot #2
Boot Options
prompt option allows you to enable or disable
press
Enabled.
sequence
options allow you to specify
from the Main Menu, you
to run
DEL
option determines the order in which
P C I
that
SETUP