Table of Contents
Advertisement
If you need to change the time, type the current
then minutes (mm), and then seconds (ss) according to a
24-hour clock. (For example, 5 P.M. would be hour 17.)
Then press GZI. If you make a mistake, press &+GJ
to erase the characters before you press ei
If you entered an invalid time (such as hour 25), you see the
time prompt again. Repeat step 5 to enter a valid time.
You see the date and time you set displayed on the screen.
Setting the Processor Speed Options
There are three processor speed options you can set to
customize your computer's processing speed. The tablebelow
lists these options and their default settings.
Auto speed
Software speed change
Power-m low speed
The Auto speed and
you to set your computer's processor to operate at one of three
speeds: high, low, and automatic.
High speed is the fastest speed at which your computer's
processor can operate, (33, 50, or 66 MHz); low speed simulates
an 8 MHz processor speed; and automatic speed switches from
high to low speed when your computer accesses a diskette
drive.
Disabled
Enabled
Disabled
Power-on low speed
Running the SETUP Program
hour (hh),
options allow
2-7
Advertisement
Table of Contents
